Source: si-plugins
Section: sound
Priority: optional
Maintainer: Équipe LibraZiK <librazik@tuxfamily.org>
Uploaders:
 Olivier Humbert <trebmuh@tuxfamily.org>
Build-Depends:
 debhelper (>= 12),
 dssi-dev,
 ladspa-sdk,
 libgl1-mesa-dev | libgl-dev,
 libglu1-mesa-dev | libglu-dev,
 libjack-jackd2-dev | libjack-dev,
 liblo-dev,
 libsamplerate0-dev,
 libx11-dev,
 libxext-dev,
 lv2-dev,
 pkg-config
Standards-Version: 3.9.8
Homepage: https://github.com/guysherman/si-plugins
#Vcs-Git: git://anonscm.debian.org/collab-maint/si-plugins.git
#Vcs-Browser: http://anonscm.debian.org/?p=collab-maint/si-plugins.git;a=summary

Package: si-plugins
Architecture: any
Depends:
 ${shlibs:Depends},
 ${misc:Depends}
Provides:
 lv2-plugins
Description: SI plugin series
 The name SI is short for "Sherman Innovations".
 .
 Currently, it's made of 4 plugins :
 .
 SI-D1 - SI Distortion #1 :
 this is a really basic distortion, based off the idea of how a simple analogue
 overdrive works: a diode network is used such that when the voltage gets high
 enough, some current flows backgwards through the diode to ground. This way,
 there is a hard limit on the voltage across the output. So I did the same with
 the plugin - it's really rough overdrive because it is very hard clipping,
 literally a set of conditional statements clamping the output.
 .
 SI-D2 - SI Distortion #2 :
 this is a slightly more advanced distortion - tanh(ax) where `a` is a
 coefficient that can range from 0.5 to 2, and x is the input sample. This gives
 a smooth(ish) edge to the clipping, which the user can control with the 'Slope'
 parameter.
 .
 SI-L1 - SI Low-pass Filter #1 :
 This is a really simple, first-order low-pass filter of the form:
 y[i] = B * x[i] + (1-B) * y[i-1]
 Where x is the stream of inputs, and y is the stream of output values and B is
 calculated from the 'Cutoff' parameter through the formula:
 B = 1 - e^(((-2*PI)*Cutoff)/SampleRate)
 .
 SI-L2 - SI Low-pass Filter #2 :
 This is a Butterworth filter of the form:
 y[i] = b0 * x[i] + b1 * x[i-1] + b2 * x[i-2] + a1 * y[i-1] + a2 * [i-2]
 Where x is the stream of inputs, and y is the stream of output values, and the
 coefficients are calculated as follows:
 # these first three are intermediate values
 float ff = cutoff/sample;
 const double ita = 1.0 / tan(M_PI*ff);
 const double q = sqrt(2.0);
 .
 b0 = 1.0 / (1.0 + q*ita + ita*ita);
 b1 = 2*b0;
 b2 = b0;
 .
 a1 = 2.0 * (ita*ita - 1.0) * b0;
 a2 = -1*(1.0 - q*ita + ita*ita) * b0;
 .
 SI-H1 - SI High-pass Filter #1 :
 This is a really simple, first-order low-pass filter of the form:
 y[i] = B * (y[i-1] + x[i] - x[i-1])
 Where x is the stream of inputs, and y is the stream of output values and B is
 calculated from the 'Cutoff' parameter through the formula:
 B = e^(((-2*PI)*Cutoff)/SampleRate)
 .
 SI-H2 - SI High-pass Filter #2 :
 This is also a 2nd order Butterworth filter, but by applying a few extra steps
 in calculating the coefficients, we get a High-pass filter instead. Apparently.
 .
 Having calculated the coefficients as in SI-L2, we do the following:
 .
 b0 = b0 * ita * ita;
 b1 = -b1 * ita * ita;
 b2 = b2 * ita * ita;
 .
 All are using the DPF framework and are available as LV2, DSSI, LADSPA, VST
 and standalone JACK-application.
 .
 Documentation page : https://librazik.tuxfamily.org/doc3/paquets
 .
 LibraZiK audio studio package 2019 ©
